|
|
| Standby
Power Systems (SPS) |
| Environmentally
Friendly, Quiet,
Reliable, AC Power |
|
|
|
| Output Voltage (VAC) |
120 RMS ± 5% |
| Output Frequency |
60 Hz ± 0.05% |
| Output Waveform |
Quasi-sine wave, with
waveform stabilizer |
| Input Voltage (VDC) |
22 to 28 |
| Operating
Temperature |
-40° to 40°C (-40° to 104°F) |
| Efficiency |
Up to 93% |
|
|
 |
|
Other Design Features:
- Thermally-controlled cooling fan
- Enclosed AC and DC cable connections with
strain relief
- Remote ON/OFF switch hookup
- LED indications of Inverter Power, Low Input
Voltage, Overload, and High Temperature
- Battery voltage indicator with push-to-test
- LED
indication of Battery Charger On, 100% charge level, 80% charge level, &
Timer Complete
|
Unit Protection:
- Automatic electronic short circuit/overload protection
- Automatic high temperature shutdown
- Output circuit breaker
Battery Protection:
- Automatic low battery shutdown at 21 volts (with in-rush delay)
|
|
| 24V Input Models |
24U15BTXP |
24X25BTXP |
24X36BTXP |
| Documentation |
|
| Output Power (Watts Continuous) |
1,500 |
2,500 |
3,600 |
|
Output Current (Amps AC) |
Up
to 12 |
Up to
21 |
Up to 30 |
|
Peak Output (Amps AC) |
45 |
80 |
108 |
|
Input Current (Amps DC) |
Up
to 75 |
Up to
125 |
Up to
180 |
|
Weight (lbs.) |
27 |
48 |
57 |
|
Dimensions (in.)
LxWxH |
13¼
x 11 x 6¾ |
14½ x 11½ x 7¾ |
| BATTERY
CHARGER |
Totally
Correct ®, selectable between wet and sealed lead acid batteries, selectable between small and large battery banks |
| Output
Current (Amps DC) |
35 |
70 |
70 |
| Input
Current (Amps AC) |
Up
to 15 |
Up to 25 |
Up to 26 |
| TRANSFER
RELAY |
Fail-safe
shore power Transfer Relay |
| Current
Rating (Amps AC) |
30 |
| Transfer
Time (milliseconds) |
less
than 35 typical |
|
Usage: Any 120 VAC, 60 Hz, product within the inverter’s power
rating that does not require a pure sine waveform.
Warranty: Full year parts and factory labor |
|
